CONDAMINE DRILLING SERVICES


A FULL SUITE OF WATER SUPPLY SERVICES & A COMPLETE UNDERSTANDING OF WATER ENGINEERING



Precision Engineering Workshop Services, Pumps and Irrigation, Parts and Equipment, Drilling Domestic Bores, Stock Bores and Monitoring Bores, Precision Engineering Workshop Services, Pumps and Irrigation, Parts and Equipment.


Condamine Drilling has been constructing irrigation and domestic water bores for primary producers in Queensland and New South Wales since 1968. We offer a full suite of water supply services with each of our divisions overlapping to enhance and supports the others.


At Condamine Drilling we have a complete understanding of water engineering, and the capacity to service and repair what we provide. We can test drill to locate and quantify your potential underground water supply; design and construct a production bore using the best materials, pump test the bore’s flow to assess yield, equip the bore with a suitable pump set for use with solar, diesel or electric power and finally, provide an irrigator to efficiently deliver the water to your crop using the latest hydraulic engineering.


GET A QUOTE

IRRIGATION BORE DRILLING


Large irrigation systems are where Condamine Drilling Group excels. With NSW and Queensland licensed drillers manning two fully equipped rigs, we have the experience and capacity to locate and construct large diameter irrigation bores using either PVC or steel casing.


We can advise on and provide any combination of materials for your bore to ensure the most efficient and economical water entry; from stainless steel wedge wire screens to machine slotted steel or PVC casing. Our bores are carefully gravel packed and cement grouted to stringent industry standards.

CONSTRUCTING & MONITORING DOMESTIC AND STOCK BORES


Our crews and equipment are proficient in domestic and stock bore construction as well as monitoring bore and piezometer projects in line with regulatory requirements. We are equipped to drill in unconsolidated alluvium as well as hard rock formations.


Our unique mud loss formulae coupled with 50 years’ drilling experience give us the knowledge to assess a test hole site and gauge a good approximation of the potential yield from that site. 

Irrigation Bore Drilling

PRECISION ENGINEERING WORKSHOP SERVICES


Turning, Milling, Welding, Fabrication, Manganese Phosphate Coating, Water Cutting


CD Precision Engineering enjoys a comprehensively equipped workshop with a specialist team of tradesmen and design engineers. Our engineers are trained in the use of SolidCam computer aided manufacturing software and our people are experts in all aspects of machining, jobbing, fabrication and manufacture. We have a range of manual and CNC lathes as well as specialist equipment including a pipe slotter, a 4 axis CNC machining centre, an automated pump column-breaker, drill presses, milling machines and saws and large bed horizontal CNC borers.


At CD Precision Engineering we value our reputation for exceptional quality workmanship and timely delivery with clients both at home and internationally. Our commitment to sustaining and promoting this culture ensures our busy workshop is constantly upgraded and scrutinised for improvement opportunities.


CD Precision Engineering is ISO 9001:2015 certified by QAS International


GET A QUOTE

WELDING & FABRICATION


Our qualified boilermakers operate onsite and offsite and can fabricate pressure pipes, structural and general projects. Our workshop is equipped with a 4 metre 135 tonne Press brake, and MMA, MIG, TIG, and gas welding equipment to cover all applications using mild steel, aluminium , stainless steel, and high alloy.

TURNING & MILLING


Capabilities accommodate one-off jobs through to full production batching. The largest machine has a 16 inch spindle with a four metre bed and allows us to turn over a 1 metre diameter. We have a range of manual and CNC lathes as well as equipment including a pipe slotter, a 4 axis CNC machining centre, an automated pump column-breaker, drill presses, milling machines and saws and large bed horizontal CNC borers.

WATER CUTTING


CD Precision Engineering’s one-stop engineering facility has a large bed water jet cutter. This machine uses pressurised water mixed with fine garnet particles which are concentrated into a fine jet to precision cut through steel sections up to 150mm thick. Its cutting capacity is not limited by material – it can accurately cut titanium, plastics, leather, ceramic tiles, stone, glass, carpet and wood.

Irrigation Welding & Fabrication Equipment
high tensile steel 6 way block

MANGANESE PHOSPHATE COATING


CD Precision Engineering Manganese Phosphate Coatings can be applied to steel components to increase resistance to wear and corrosion. This coating is predominantly used for lubrication purposes and anti-galling. Manganese Phosphate is the hardest of all phosphate coatings and is typically used on fittings, fasteners, bearings and bushes. Because of its oil absorptive properties it is also used on any fittings that slide against one another and is widely used in engines and transmissions on cylinder liners, piston rings, camshafts, differential gears and transmission gears.


The Defence Industry has specified Manganese Phosphate coatings for a large percentage of steel and iron ordinance components for decades.

PVC & STEEL BORE CASING


As an extension to our own drilling activities, Condamine Drilling Group is proficient and experienced in the design and manufacture of threaded pipe for various external applications. We make casing strings for groundwater projects, mine ventilation, monitoring or earthwork drainage in a range of materials.


We machine steel, stainless steel, PVC (up to DN350) pipes with flush joint threads, threads for couplings, cut, groove or weld prep pipe ends. We can also slot these materials or supply stainless steel wedge wire screens with appropriate adaptors or butt welded connections.

PUMPS & IRRIGATION


Bore Rehabilitation, Solar Pumps, Pump Testing, Lateral Irrigators, Pivot Irrigators 

   

CD Pumps & Irrigation division specialise in all aspects of water management projects including the design, supply, installation and servicing of irrigation systems, pumps, pipe work, filtration, tanks, solar pumping systems, diesel engines and generators for Domestic, Commercial, Agricultural and Mining applications. 


CD Pumps & Irrigation has also designed and developed its own range of bore hole pumps. These units have been installed in irrigation applications over the last 40 years and enjoy a peerless reputation for reliability and long life.


Many of our clients and their families have been dealing with Condamine Drilling for decades and we are proud of our tradition for excellence and customer service. Because CD Pumps & Irrigation appreciates the value of your investment, and the critical nature of an uninterrupted water supply CD Pumps & Irrigation offers ongoing preventative maintenance programmes to ensure maximum efficiency and longevity from bore and pump combinations.


GET A QUOTE

BORE REHABILITATION


As water bore specialists, CD Pumps & Irrigation has extensive experience in the field of bore rehabilitation and repairs, which complements our drilling operations.


We offer a full range of Bore Repair Services including:

  • Iron bacteria, manganese and calcification treatment, which may include pump removal, chemical treatment, mechanical plunging, airlifting, purging and pump re-installation
  • Down hole camera to investigate and record casing, screen and slot integrity to a depth of 200m
  • Re-sleeve bores with new casing, either PVC, steel or stainless steel in conjunction with screens or slots inserted where original casing or screen is damaged or unsuitable
  • Economical repairs with purpose-built equipment and tools installed by a specialised crew
  • Down hole tools to clean and investigate bores to a depth of 500m

CD’s purpose-built pump rigs and expert on site crews are experienced and proficient in the rehabilitation and repair of water bores.


We can chemically treat bacterial
infestations to restore yield and reline and repair corroded bores in many cases.

rehabilitated Australian farming irrigation system
Australian farming irrigation

SOLAR PUMPS


Solar pumps are a large part of our business and with the rising price of power and fuel, these options are an efficient option for pumping water. Advancements in technology and solar panels means we can install solar on just about any application. Large scale solar for irrigation is now a possibility and will become the future of irrigation.

PUMP TESTING


CD Pumps & Irrigation uses custom built equipment to perform a comprehensive range of pump testing procedures. We can test bore flow rates from 0.1 litres per second to 100 litres per second using submersible pumps or line shaft pumps to gauge long term supply and recovery rates.

LATERAL & PIVOT IRRIGATORS


CD Pumps & Irrigation are licensed dealers of REINKE Irrigation Systems. We have qualified technicians who specialise in the design, supply and installation of REINKE irrigation systems including, lateral and pivot irrigation, trenching, underground pipework, poly welding, and pump stations.

CD ONE STOP RIG SHOP


Parts, Fittings and Equipment 


The CD One Stop Rig Shop completes the full suite of supply and services delivered for domestic, agricultural, municipal, mining and exploration applications. 


GET A QUOTE

PARTS, FITTINGS & EQUIPMENT


The CD One Stop Rig Shop supplies the oil and gas industry, agriculture and water well clients with a full range of parts and equipment. We stock so many parts and fittings we can’t name them all here and if we don't stock it we can get it for you.


Here is a selection of some of our most popular items:

  • High pressure fittings up to 15000 psi
  • Hammer unions
  • Elbows
  • Bushes
  • Reducing Tees
  • Gaskets
  • Flanges and sockets
  • Black steel fittings
  • Stainless steel fittings
  • Galvanised steel fitting
irrigation parts for installation and repair
Share by: